Digital Dispensary

Product Sections


Best Sellers

'O' Ring for Thermostat

'O' Ring for Thermostat

0.55

Application: Series 1, 2 & 3 4cylinder engines.
Description: 'O' ring for sealing thermostat to cylinder head.
Approximate dimensions: outside diameter 55mm (2.2").
Original part number 01645
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Gasket Exhaust Manifold to Down Pipe

Gasket Exhaust Manifold to Down Pipe

0.96

Application: Series 1, 2 & 3 four cylinder engines.
Description: Square flange gasket for exhaust. Used on various exhaust manifolds and on some pipe to pipe exhaust joints.
find out more

Thermostat 82 degrees

Thermostat 82 degrees

10.61

Application: Series 1 1.6ltr & 2.0ltr petrol engines, Defender 2.5 & 2.5TD diesel engines.

Description: Waxstat 82degree thermostat.

Original part number: 504560.

find out more

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

12.58

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Gasket Oil Retaining Cap to Block

Gasket Oil Retaining Cap to Block

2.96

Application: Series 1 fitted with 1600cc petrol (gasolene) engine and 1954 only 2000cc petrol (gasolene) engine.
Description: Cork gasket for oil retaining cap to rear of cylinder block.
Approximate dimensions: internal diameter 108mm (4.25")
find out more

Steering Box Repair Kit

Steering Box Repair Kit

27.00

Application: Late Series 1, Series 2/2A and Series 3.

Description: Manual steering box repair kit suitable for both left hand drive and right hand drive vehicles. Kit contains 20x 9/32" diameter balls, 12x 3/8" diameter balls, 2x bearing races, 6x gaskets/shims, bush, 'o' ring and retainer for output shaft.

Back in stock.
find out more

Inner Wheel Hub Seal

Inner Wheel Hub Seal

4.28

Application: Series 1 front axles, Series 2 & Series 3 to 1980.
Description: Inner hub oil seal made by Corteco/Gaco.
Approximate dimensions: outside diameter 85mm (3.35"), thickness 7.8mm (0.3").
Original part number 239422.

find out more

Fixings Kit for Water Pump

Fixings Kit for Water Pump

19.87

Application: Series One, 1948 to 1958.

Description: Set of fixings for water pump comprising the following parts;
6x 250517 bolt 1/4"BSF x 1.5", 1x 250518 bolt 1/4"BSF x 1.75", 1x 237150 bolt 1/4"BSF x 2.25", 2x set screw 5/16"BSW x 11/16" plus 8x 1/4" lock washers and 2x 5/16" lock washers.
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > DEFENDER Parts > Defender Books and Publications.
Page:  1  2   >   >>
Defender 1983 to 2006 Technical Publications Ref: ZZLTP3003
Comprehensive contents covering parts books, owners manuals and workshop manuals for Defenders from 1983 to 2006.

Product Features
> Printable - print only the pages you need. (Windows only)
> Searchable - search the entire section in seconds.
> Zoom - zoom in to see the exact details.
> Bookmarked - manuals are bookmarked to quickly locate sections.

System Requirements
PC Windows 2000 or later; DVD Reader, PDC viewer; must have administration rights to allow installation.
Mac OS X Mac OS X 10.4 or above. For OS X 10.6 (Snow Leopard) DVD Reader, PDC viewer
Important - Documents are viewable but not printable through Mac OSX. To print using a Mac you must be running a Windows installation e.g. using PC emulation software

Price: 51.66 (61.99 Including VAT at 20%)



Defender 1983 to 2006 Technical Publications
Workshop Manual Ninety One Ten 1983 - 1993 Ref: SLR621ENWM
Official Land Rover Manual reprinted by Brooklands Books
Workshop manual for all Ninety, One Ten and 127/130 models from 1983 upto 1993. Up to and including the 200TDi engine.
Soft back 8.25" x 11.5", 730 Pages approx
Models covered 90, 110, 127, 130 1983-1993

Price: 44.95



Workshop Manual Ninety One Ten 1983 - 1993
Workshop manual for Defender 1993 to 1996 Ref: LDAWMEN93
Official Land Rover Manual reprinted by Brooklands Books
Workshop manual for all Ninety, One Ten and 130 models from 1993 to 1995. Includes wiring diagrams, data and specifications, maintenance as well as repair and replacement procedures.
Soft back 8.25" x 11.5", 1050 Pages approx
Models covered 90, 110 & 130 1993-1995

Price: 51.25



Workshop manual for Defender 1993 to 1996
Haynes Manual for Defender Diesel Ref: ZZHAYNES3017
HAYNES LAND ROVER 90, 110 & DEFENDER 1983 TO 1995 DIESEL SERVICE and REPAIR MANUAL
by Mark Coombs and Steve Rendle
Covers models with 2.3, 2.5, 2.5DT, 200Tdi and 300Tdi diesel engines. A good basic manual with additional sections on fault finding, MOT test checks and roadside repairs. 
Hard back, 10.9" x 8.4"
approx. 260 Pages with 100's b&w photos and diagrams
Models covered:
90, 110 and Defender 1983 to 1995

Price: 17.80



Haynes Manual for Defender Diesel
Workshop Manual for Defender 1996-1998 Ref: ZZBOOKB-LRDDWH
Two book set;
Workshop Manual for Defender 1996 to 1998 - LRL0097ENG (3rd edition).
Combined overhaul manuals for 300Tdi engie, R380 gearbox and LT230T transfer box. Part numbers LRL0070, LRL0003 & LRL0081.
Both manuals are soft back, 11.5" x 8.25" with approx 750 pages in total.

Price: 44.95



Workshop Manual for Defender 1996-1998
Circuit Diagrams Defender 1997/8 Ref: LRL0125ENG
Electrical Circuit Diagrams
Defender 97 Model Year
Published by Rover Technical Communication
The wiring circuits for the '97 Defender split out into 15 sections.
Loose leaf - sealed surface paper, 32 Pages + covers 8.2" x 11.7"
Models covered Defender '97 & '98 model years.

Price: 29.95



Circuit Diagrams Defender 1997/8
Workshop Manual for Defender TD5 Ref: LRL0410BB
Application: Defender TD5 1999 to 2005.
Description: Soft bound manual incorporating LRL0410ENG workshop manual supplement for TD5, LRL0079 -relevant sections to cover the rest of the Defender, LRL0003 R380 overhaul manual, LRL0081 LT230T transfer box overhaul manual.
Aproximate dimensions: 21cm (8.3") by 29cm (11.4") by 28mm (1.1") thick.

Price: 52.95



Workshop Manual for Defender TD5
Electric Manual Defender 1999 to 2005 Ref: LRD5EHBB
Application: Defender TD5 and 300TDI from 1999 to 2005.
Description: Soft bound manual including the following publications; YVB101670 electric circuit diagrams TD5, VDL100170 electrical library TD5, LRL0452ENG circuit diagrams 300TDI, LRL0389ENG electrical library 300TDi.
Approximate dimensions: 21cm (8.3") by 29cm (11.4") by 19mm (0.75") thick.

Price: 27.18



Electric Manual Defender 1999 to 2005
Parts Catalogue Defender 1986 to 2002 Ref: STC9021CC
Defender Parts Catalogue, covers all Defenders (90, 110 &130) from approx 1986 to 2006. 2.25petrol, 2.5 petrol, 2.5 diesel, 2.5 turbo diesel, 200TDi, 300TDi, TD5, V8 carb and V8 efi.

This is a massive book measuring 297mm(11.7") x 207mm(8.2") x 44mm(1.73") thick containing 100s of pages. This is a reprint by Brookland Books.

Price: 56.50



Parts Catalogue Defender 1986 to 2002
Owners Handbook 1991 to 1994 Ref: LDAHBEN93
Owners Handbook for Defender 1991 to 1994 with the following engines 2.5 petrol, V8 petrol, 2.5 diesel and 200Tdi. In 6 sections, Introduction, Controls, Driving and Operating, Drivers Maintenance, Workshop Maintenance, Lubricaion Chart and General Data.
Soft back book 14.5cm (5.7") by 21cm (8.3"), approx 190 pages with many drawings and charts.

Price: 13.95



Owners Handbook 1991 to 1994
Digital Dispensary > DEFENDER Parts > Defender Books and Publications.
Page:  1  2   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Pulley - Alternator/Dynamo

Pulley - Alternator/Dynamo

10.20

Application: Series3 and early Defender. Also possibly Sweries2A.

Description: Pulley for alternator and possibly some dynamos. Takes 'A' section belt.

Approximate dimensions: Overall diameter 69mm(2.7"), spindle diameter 9/16"(14mm), height 23mm(0.8")


find out more

Reverse Gear Assembly

Reverse Gear Assembly

92.08

Application: Series 1, Series 2 and Series 2A with part syncromesh gearbox.

Description: OE spec reverse gear assembly with bronze bush. Larger wheel has 20 teeth, smaller 17 teeth.

Approximate dimesions: Overall diameter 75mm(3"), internal diameter 20.8mm(0.82"), length 35mm(1.4")

Previous part number: 217389

find out more

Horn Button

Horn Button

14.42

Application: Late Series1 and early Series2.

Description: Reproduction horn switch mounted on side of steering column.

Approximate dimensions: Length 52mm(2"), width 38mm(1.5"), depth 25mm(1").

find out more

Lever Assemby for Throttle Linkage

Lever Assemby for Throttle Linkage

44.52

Application: Series 2A and Series 3 when Zenith carburrettor (or Weber conversion) is fitted.

Description: Lever assembly for throttle linkage, required when changing from Solex to Zenth. Supplied with bronze bush and ball.

Approximate dimensions: Overall length 132mm(5.2").

find out more

Locking Hasp for Fuel Cap

Locking Hasp for Fuel Cap

4.50

Application: Series 2a and Series 3.

Description: Locking hasp for fuel cap with 'ears'. Allows use of padlock to secure fuel cap.

Approximate dimensions: Mounting screw centres 70mm(2.75")

Old part number: GLR361

find out more

Bail Assembly

Bail Assembly

2.70

Application: Series 2A and Series 3.

Description: Retainer for glass bowl on side of lift pump on 4 cylinder models.

Approximate dimensions: Overall length 92mm, width 58mm.

find out more

Fuel Filler Cap

Fuel Filler Cap

26.46

Application: Series 2a and Series 3.

Description: Old stock Unipart 2 lug fuel filler cap. Supplied with seal,

Approximate dimensions: Overa;; diameter 96mm(3.8").

find out more

6 Way Lighting Switch - Military

6 Way Lighting Switch - Military

153.60

Application: Series3, Light Weight, 101 and Defender military models.

Description: Old stock Lucas 34259 six way lighting swith with facility for lock barrel (not supplied).


find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -