Digital Dispensary

Product Sections


Best Sellers

'O' Ring for Thermostat

'O' Ring for Thermostat

0.55

Application: Series 1, 2 & 3 4cylinder engines.
Description: 'O' ring for sealing thermostat to cylinder head.
Approximate dimensions: outside diameter 55mm (2.2").
Original part number 01645
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Gasket Exhaust Manifold to Down Pipe

Gasket Exhaust Manifold to Down Pipe

0.96

Application: Series 1, 2 & 3 four cylinder engines.
Description: Square flange gasket for exhaust. Used on various exhaust manifolds and on some pipe to pipe exhaust joints.
find out more

Thermostat 82 degrees

Thermostat 82 degrees

10.61

Application: Series 1 1.6ltr & 2.0ltr petrol engines, Defender 2.5 & 2.5TD diesel engines.

Description: Waxstat 82degree thermostat.

Original part number: 504560.

find out more

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

12.58

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Gasket Oil Retaining Cap to Block

Gasket Oil Retaining Cap to Block

2.96

Application: Series 1 fitted with 1600cc petrol (gasolene) engine and 1954 only 2000cc petrol (gasolene) engine.
Description: Cork gasket for oil retaining cap to rear of cylinder block.
Approximate dimensions: internal diameter 108mm (4.25")
find out more

Steering Box Repair Kit

Steering Box Repair Kit

27.00

Application: Late Series 1, Series 2/2A and Series 3.

Description: Manual steering box repair kit suitable for both left hand drive and right hand drive vehicles. Kit contains 20x 9/32" diameter balls, 12x 3/8" diameter balls, 2x bearing races, 6x gaskets/shims, bush, 'o' ring and retainer for output shaft.

Back in stock.
find out more

Inner Wheel Hub Seal

Inner Wheel Hub Seal

4.28

Application: Series 1 front axles, Series 2 & Series 3 to 1980.
Description: Inner hub oil seal made by Corteco/Gaco.
Approximate dimensions: outside diameter 85mm (3.35"), thickness 7.8mm (0.3").
Original part number 239422.

find out more

Fixings Kit for Water Pump

Fixings Kit for Water Pump

19.87

Application: Series One, 1948 to 1958.

Description: Set of fixings for water pump comprising the following parts;
6x 250517 bolt 1/4"BSF x 1.5", 1x 250518 bolt 1/4"BSF x 1.75", 1x 237150 bolt 1/4"BSF x 2.25", 2x set screw 5/16"BSW x 11/16" plus 8x 1/4" lock washers and 2x 5/16" lock washers.
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > DISCOVERY 1 parts > Discovery 1 Braking System
Page:  1  2  3   >   >>
Pair of Front Brake Discs by Lockheed Ref: FRC7329DPAIR
Pair of Lockheed - Delphi boxed solid brake discs.
Application: Defender front 1983 to 2000, Range Rover Classic 1986 to 1989, Discovery 1 1989 to 1999.
Approximate dimensions: overall diameter 30cm, inside diameter 10cm, overall width 7.9cm, thickness of disc 14mm

Price: 39.50 (47.40 Including VAT at 20%)



Pair of Front Brake Discs by Lockheed
Fitting Kit for a pair of Discs Ref: BRAKEDISCFITKIT02
Fitting kit containing 10x screws and lock washers to fix disc to hub, 2 each of inner and outer hub seals, 2x hub nut lockers and 2x flange gaskets. Inner oil seals are original equipment by Gaco/Angus, outer are replacement.
Application: Range Rover Classic 1985 to 1989 and non-ABS to JA624516. Discovery up to chassis # JA032850. Either front or rear pair.

Price: 12.50 (15.00 Including VAT at 20%)



Fitting Kit for a pair of Discs
Fitting Kit for a Pair of Discs Ref: BRAKEDISCFITKIT03
Fitting kit containing 10x screws and lock washers to fix disc to hub, 2 hub oil seals, choice of 2x hub nut lockers and 2x flange gaskets. Oil seals are original equipment by Gaco/Angus.
Application: Range Rover Classic 1990 to 1995 except non-ABS to JA624516. Discovery 1 from chassis # JA032851 onwards. Defender from chassis number LA930435. Either front or rear pair.

Price: 12.50 (15.00 Including VAT at 20%)



Fitting Kit for a Pair of Discs
Genuine Front Brake Pads Ref: sfp500220
Application: Discovery 1 to chassis number KA034313, Classic Range Rover from 1986 to 1989. Vehicles with solid front discs.

Description: Axle set of pads (4 pads) with fitting kit. One pad fitted with wear sensor. Retained by split pins.

Approximate dimensions: each pad is 105mm (4.13") wide and 73mm (2.87") high including the tab.

Old part number: STC9187

Price: 44.26 (53.11 Including VAT at 20%)



Genuine Front Brake Pads
Mintex Front Brake Pad Set Ref: STC9187D
Application: Discovery 1 to chassis number KA034313, Classic Range Rover from 1986 to 1989. Vehicles with solid front discs.

Description: Axle set of pads (4 pads). One pad fitted with wear sensor. Retained by split pins.
Not supplied with fitting kit, use STC8573.

Approximate dimensions: each pad is 105mm (4.13") wide and 73mm (2.87") high including the tab.

Price: 18.24 (21.89 Including VAT at 20%)



Mintex Front Brake Pad Set
Genuine Rear Brake Pads Ref: SFP500190
Application: Discovery 1 rear brakes from approximately 1995 when no sensor was fitted.

Description: Set of four genuine boxed brake pads with fitting kit of 4x split pins and four spring clips.

Approximate dimensions: each pad measures 88mm (3.46") by 71mm (2.8").

Old part number: STC9188

Price: 44.40 (53.28 Including VAT at 20%)




People who bought this item also bought:
1. Genuine Front Brake Pads (Ref: SFP500160)
2. Genuine Filter Service Kit for Discovery 300TDi (Ref: FILTERSDISCO300G)
Genuine Rear Brake Pads
Mintex Rear Brake Pad Set Ref: SFP000270D
Application: Discovery 1 rear from approximately 1995. Defender 90 rear from chassis range 2A onwards (2002 model year).

Description: Set of four Mintex brake pads, set number MLB43. No fitting kit supplied, see STC8574.

Approximate dimensions: each pad measures 88mm (3.46") by 71mm (2.8").

Price: 14.00 (16.80 Including VAT at 20%)



Mintex Rear Brake Pad Set
Genuine Front Brake Pads - Vented Discs Ref: SFP500180
Application: Vented front disc brakes on Range Rover Classic 1990 to 1995 and Discovery 1 (NB not many Discovery 1s were fitted with vented front discs).

Description: Set of 4 brake pads (one with wear sensor), plus fitting kit of 4x solid pins, 4x springs and 4x 'R' clips.

Approximate dimensions: each pad is 105mm (4.13") wide and 72mm (2.83") high.

Old part number: STC9190


Price: 32.69 (39.23 Including VAT at 20%)



Genuine Front Brake Pads - Vented Discs
Mintex Front Brake Pads - Vented Discs Ref: STC9190D
Application: Vented front disc brakes on Range Rover Classic 1990 to 1995 and Discovery 1 (NB not many Discovery 1s were fitted with front vented discs).

Description: Mintex set of 4 brake pads (one with wear sensor) part number MLB116. Not supplied with fitting kit, use STC8575 if required.

Approximate dimensions: each pad is 105mm (4.13") wide and 72mm (2.83") high.

Price: 18.50 (22.20 Including VAT at 20%)



Mintex Front Brake Pads - Vented Discs
Genuine Front Brake Pads Ref: SFP500160
Application: Discovery 1 front brakes with solid discs from approximately 1995. Where pads are retained by solid pins through holes in pads.

Description: Set of four genuine brake pads. Supplied with fitting kit of 4 springs and 4 small split pins. If main retaining pins required see RTC5001.

Approximate dimensions: each pad measures 105mm (4.13") by 73mm (2.87").

Old part number: STC9191, STC9150

Price: 54.90 (65.88 Including VAT at 20%)




People who bought this item also bought:
1. Genuine Rear Brake Pads (Ref: SFP500190)
2. Genuine Filter Service Kit for Discovery 300TDi (Ref: FILTERSDISCO300G)
Genuine Front Brake Pads
Digital Dispensary > DISCOVERY 1 parts > Discovery 1 Braking System
Page:  1  2  3   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Pulley - Alternator/Dynamo

Pulley - Alternator/Dynamo

10.20

Application: Series3 and early Defender. Also possibly Sweries2A.

Description: Pulley for alternator and possibly some dynamos. Takes 'A' section belt.

Approximate dimensions: Overall diameter 69mm(2.7"), spindle diameter 9/16"(14mm), height 23mm(0.8")


find out more

Reverse Gear Assembly

Reverse Gear Assembly

92.08

Application: Series 1, Series 2 and Series 2A with part syncromesh gearbox.

Description: OE spec reverse gear assembly with bronze bush. Larger wheel has 20 teeth, smaller 17 teeth.

Approximate dimesions: Overall diameter 75mm(3"), internal diameter 20.8mm(0.82"), length 35mm(1.4")

Previous part number: 217389

find out more

Horn Button

Horn Button

14.42

Application: Late Series1 and early Series2.

Description: Reproduction horn switch mounted on side of steering column.

Approximate dimensions: Length 52mm(2"), width 38mm(1.5"), depth 25mm(1").

find out more

Lever Assemby for Throttle Linkage

Lever Assemby for Throttle Linkage

44.52

Application: Series 2A and Series 3 when Zenith carburrettor (or Weber conversion) is fitted.

Description: Lever assembly for throttle linkage, required when changing from Solex to Zenth. Supplied with bronze bush and ball.

Approximate dimensions: Overall length 132mm(5.2").

find out more

Locking Hasp for Fuel Cap

Locking Hasp for Fuel Cap

4.50

Application: Series 2a and Series 3.

Description: Locking hasp for fuel cap with 'ears'. Allows use of padlock to secure fuel cap.

Approximate dimensions: Mounting screw centres 70mm(2.75")

Old part number: GLR361

find out more

Bail Assembly

Bail Assembly

2.70

Application: Series 2A and Series 3.

Description: Retainer for glass bowl on side of lift pump on 4 cylinder models.

Approximate dimensions: Overall length 92mm, width 58mm.

find out more

Fuel Filler Cap

Fuel Filler Cap

26.46

Application: Series 2a and Series 3.

Description: Old stock Unipart 2 lug fuel filler cap. Supplied with seal,

Approximate dimensions: Overa;; diameter 96mm(3.8").

find out more

6 Way Lighting Switch - Military

6 Way Lighting Switch - Military

153.60

Application: Series3, Light Weight, 101 and Defender military models.

Description: Old stock Lucas 34259 six way lighting swith with facility for lock barrel (not supplied).


find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -