Digital Dispensary

Product Sections


Best Sellers

'O' Ring for Thermostat

'O' Ring for Thermostat

0.55

Application: Series 1, 2 & 3 4cylinder engines.
Description: 'O' ring for sealing thermostat to cylinder head.
Approximate dimensions: outside diameter 55mm (2.2").
Original part number 01645
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Gasket Exhaust Manifold to Down Pipe

Gasket Exhaust Manifold to Down Pipe

0.96

Application: Series 1, 2 & 3 four cylinder engines.
Description: Square flange gasket for exhaust. Used on various exhaust manifolds and on some pipe to pipe exhaust joints.
find out more

Thermostat 82 degrees

Thermostat 82 degrees

10.61

Application: Series 1 1.6ltr & 2.0ltr petrol engines, Defender 2.5 & 2.5TD diesel engines.

Description: Waxstat 82degree thermostat.

Original part number: 504560.

find out more

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

12.58

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Gasket Oil Retaining Cap to Block

Gasket Oil Retaining Cap to Block

2.96

Application: Series 1 fitted with 1600cc petrol (gasolene) engine and 1954 only 2000cc petrol (gasolene) engine.
Description: Cork gasket for oil retaining cap to rear of cylinder block.
Approximate dimensions: internal diameter 108mm (4.25")
find out more

Steering Box Repair Kit

Steering Box Repair Kit

27.00

Application: Late Series 1, Series 2/2A and Series 3.

Description: Manual steering box repair kit suitable for both left hand drive and right hand drive vehicles. Kit contains 20x 9/32" diameter balls, 12x 3/8" diameter balls, 2x bearing races, 6x gaskets/shims, bush, 'o' ring and retainer for output shaft.

Back in stock.
find out more

Inner Wheel Hub Seal

Inner Wheel Hub Seal

4.28

Application: Series 1 front axles, Series 2 & Series 3 to 1980.
Description: Inner hub oil seal made by Corteco/Gaco.
Approximate dimensions: outside diameter 85mm (3.35"), thickness 7.8mm (0.3").
Original part number 239422.

find out more

Fixings Kit for Water Pump

Fixings Kit for Water Pump

19.87

Application: Series One, 1948 to 1958.

Description: Set of fixings for water pump comprising the following parts;
6x 250517 bolt 1/4"BSF x 1.5", 1x 250518 bolt 1/4"BSF x 1.75", 1x 237150 bolt 1/4"BSF x 2.25", 2x set screw 5/16"BSW x 11/16" plus 8x 1/4" lock washers and 2x 5/16" lock washers.
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > DISCOVERY 1 parts > Discovery 1 Driveline
Nut and Bolt Kit for Propshafts Ref: PROPFIX01
Application: Series 1, Series 2, Series 2A, Series 3 Land Rovers. All Defenders, Classic Range Rover, Range Rover 2 (38A), Discovery 1 and Discovery 2.

Description: Set of four 3/8UNF x 1.125" long bolts plus four short nyloc nuts.

Price: 2.00 (2.40 Including VAT at 20%)




People who bought this item also bought:
1. Replacement Propshaft Gaiter Kit (Ref: 276484D)
2. Gasket Exhaust Manifold to Down Pipe (Ref: 213358)
3. Blanking Gommet for Bell Housing (Ref: 232604)
Nut and Bolt Kit for Propshafts
GKN Heavy Duty Universal Joint Repair Kit Ref: TVC100010=
Application: Defender to 2000 and rear only from 2001 onwards, Classic Range Rover 1985 to 1995, Discovery 1 and Discovery 2.

Description: Hardy Spicer/GKN universal joint repair kit including 4 circlips and a grease nipple. Caps are longer than standard giving greater bearing area.

Approximate Dimensions: Distance across faces of joint 75mm (2.95"), cap diameter 27mm (1.06"), cap length including seal 19mm ( 0.75").

Price: 17.03 (20.44 Including VAT at 20%)





Related products:
1. Nut and Bolt Kit for Propshafts (Ref: PROPFIX01)
GKN Heavy Duty Universal Joint Repair Kit
GKN boxed Universal Joint Repair Kit Ref: TVC100010D
Application: Defender to 2000 and rear only from 2001 onwards, Classic Range Rover 1985 to 1995, Discovery 1 and Discovery 2.

Description: GKN Driveline U110 universal joint repair kit including 4 circlips and a grease nipple. This kit uses standard length caps.

Approximate Dimensions: Distance across faces of joint 75mm (2.95"), cap diameter 27mm (1.06"), cap length including seal 17mm ( 0.67").

Price: 10.49 (12.59 Including VAT at 20%)




People who bought this item also bought:
1. Kit for Double Carden Centre Bearing (Ref: ZZE470081)


Related products:
1. Nut and Bolt Kit for Propshafts (Ref: PROPFIX01)
GKN boxed Universal Joint Repair Kit
GKN Propshaft Donut Kit Ref: TVF100010
Application: Discovery 1, Discovery 2, Range Rover 2 (38A), rear propellor shaft to rear axle joint.

Description: GKN original equipment kit containing rubber coupling, seal piece, 3 bolts with nuts and 6 washers.


Price: 35.00 (42.00 Including VAT at 20%)



GKN Propshaft Donut Kit
Hub Bearing Kit - Defender, Discovery and Classic Range Rover Ref: WHEELBRGKIT04
Application: Defender rear from approx 1985 to 1993, Discovery 1 to 'JA' chassis number (1992) front and rear, Range Rover Classic 1985 to 1995 non-ABS front and rear.

Description: Kit of parts to service one wheel hub. Kit comprises a pair of Timken wheel bearings, Gaco inner seal, replacement outer seal, seal spacer, 2x flange gaskets and hub nut locker.

Price: 23.03 (27.64 Including VAT at 20%)



Hub Bearing Kit - Defender, Discovery and Classic Range Rover
Lock Nut for Hub Bearing Ref: FRC8700D
Application: Series 1, Series 2, Series 3, Range Rover Classic, Discovery 1 and Defender.
Description: Lock nut for hub bearings. Used with second lock nut and locking washer.
Approximate dimensions: 52mm (2 1/16") across flats, thickness 8.5mm (0.33").
Original part number: 217355

Price: 0.85 (1.02 Including VAT at 20%)




People who bought this item also bought:
1. Locker for Hub Nuts (Ref: 217353=)
2. Key Washer for Hub Bearing (Ref: 217352D)
3. Genuine One Shot Swivel Housing Grease (Ref: STC3435)
Lock Nut for Hub Bearing
Replacement Swivel Pin Kit for Classic and Discovery 1 Ref: SWIVELPINKIT04
Application: Range Rover Classic from July 1985 on except for ABS. Discovery 1 to chassis # JA032849. Where seven bolts hold swivel housing to axle tube.

Description: Kit of replacement parts to overhaul one swivel assembly. Kit contains; pair of Timken swivel bearings, 9mm thick swivel seal, inner seal, bottom pin gasket, gasket swivel to axle tube, 2x lockers and 7x assorted shims.

Price: 40.11 (48.13 Including VAT at 20%)



Replacement Swivel Pin Kit for Classic and Discovery 1
Replacement Swivel Pin Kit for Discovery 1 with ABS Ref: SWIVELPINKIT06
Application: Discovery 1 to 1997 with ABS (advanced braking system).

Description: Kit of replacement parts to overhaul one swivel assembly. Kit contains; top swivel pin with seal and retainer for ABS sensor, top swivel pin bush, thrust washer for top pin, one Timken swivel bearing, 9mm thick swivel seal, inner seal, bottom pin gasket, gasket swivel to axle tube and 7x assorted shims.

Price: 45.78 (54.94 Including VAT at 20%)



Replacement Swivel Pin Kit for Discovery 1 with ABS
Replacement Swivel Housing Ref: FTC5366D
Application: Classic Range Rover 1985 to 1995 non ABS, Discovery 1 non ABS, Defender 1994 onwards.

Description: Replacement swivel housing which is fitted with taper roller bearings top and bottom. It has a seven bolt flange to the axle tube.

Previous part number: FRC7065

Price: 91.31 (109.57 Including VAT at 20%)



Replacement Swivel Housing
Genuine One Shot Swivel Housing Grease Ref: STC3435
Application: Series 1, Series 2 & 2A, Series 3, Defender, Discovery 1, Range Rover Classic.

Description: 375ml sachet of semi-fluid grease. Correct volume to fill one swivel housing. Replaces EP90 oil and is considerably less prone to leak.

Price: 6.71 (8.05 Including VAT at 20%)




People who bought this item also bought:
1. Lock Nut for Hub Bearing (Ref: FRC8700D)
2. Bearing for Front Half-Shaft (Ref: 55713)
3. Locker for Hub Nuts (Ref: 217353=)
Genuine One Shot Swivel Housing Grease
Digital Dispensary > DISCOVERY 1 parts > Discovery 1 Driveline

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Pulley - Alternator/Dynamo

Pulley - Alternator/Dynamo

10.20

Application: Series3 and early Defender. Also possibly Sweries2A.

Description: Pulley for alternator and possibly some dynamos. Takes 'A' section belt.

Approximate dimensions: Overall diameter 69mm(2.7"), spindle diameter 9/16"(14mm), height 23mm(0.8")


find out more

Reverse Gear Assembly

Reverse Gear Assembly

92.08

Application: Series 1, Series 2 and Series 2A with part syncromesh gearbox.

Description: OE spec reverse gear assembly with bronze bush. Larger wheel has 20 teeth, smaller 17 teeth.

Approximate dimesions: Overall diameter 75mm(3"), internal diameter 20.8mm(0.82"), length 35mm(1.4")

Previous part number: 217389

find out more

Horn Button

Horn Button

14.42

Application: Late Series1 and early Series2.

Description: Reproduction horn switch mounted on side of steering column.

Approximate dimensions: Length 52mm(2"), width 38mm(1.5"), depth 25mm(1").

find out more

Lever Assemby for Throttle Linkage

Lever Assemby for Throttle Linkage

44.52

Application: Series 2A and Series 3 when Zenith carburrettor (or Weber conversion) is fitted.

Description: Lever assembly for throttle linkage, required when changing from Solex to Zenth. Supplied with bronze bush and ball.

Approximate dimensions: Overall length 132mm(5.2").

find out more

Locking Hasp for Fuel Cap

Locking Hasp for Fuel Cap

4.50

Application: Series 2a and Series 3.

Description: Locking hasp for fuel cap with 'ears'. Allows use of padlock to secure fuel cap.

Approximate dimensions: Mounting screw centres 70mm(2.75")

Old part number: GLR361

find out more

Bail Assembly

Bail Assembly

2.70

Application: Series 2A and Series 3.

Description: Retainer for glass bowl on side of lift pump on 4 cylinder models.

Approximate dimensions: Overall length 92mm, width 58mm.

find out more

Fuel Filler Cap

Fuel Filler Cap

26.46

Application: Series 2a and Series 3.

Description: Old stock Unipart 2 lug fuel filler cap. Supplied with seal,

Approximate dimensions: Overa;; diameter 96mm(3.8").

find out more

6 Way Lighting Switch - Military

6 Way Lighting Switch - Military

153.60

Application: Series3, Light Weight, 101 and Defender military models.

Description: Old stock Lucas 34259 six way lighting swith with facility for lock barrel (not supplied).


find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -