Digital Dispensary

Product Sections


Best Sellers

'O' Ring for Thermostat

'O' Ring for Thermostat

0.55

Application: Series 1, 2 & 3 4cylinder engines.
Description: 'O' ring for sealing thermostat to cylinder head.
Approximate dimensions: outside diameter 55mm (2.2").
Original part number 01645
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Gasket Exhaust Manifold to Down Pipe

Gasket Exhaust Manifold to Down Pipe

0.96

Application: Series 1, 2 & 3 four cylinder engines.
Description: Square flange gasket for exhaust. Used on various exhaust manifolds and on some pipe to pipe exhaust joints.
find out more

Thermostat 82 degrees

Thermostat 82 degrees

10.61

Application: Series 1 1.6ltr & 2.0ltr petrol engines, Defender 2.5 & 2.5TD diesel engines.

Description: Waxstat 82degree thermostat.

Original part number: 504560.

find out more

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

12.58

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Gasket Oil Retaining Cap to Block

Gasket Oil Retaining Cap to Block

2.96

Application: Series 1 fitted with 1600cc petrol (gasolene) engine and 1954 only 2000cc petrol (gasolene) engine.
Description: Cork gasket for oil retaining cap to rear of cylinder block.
Approximate dimensions: internal diameter 108mm (4.25")
find out more

Steering Box Repair Kit

Steering Box Repair Kit

27.00

Application: Late Series 1, Series 2/2A and Series 3.

Description: Manual steering box repair kit suitable for both left hand drive and right hand drive vehicles. Kit contains 20x 9/32" diameter balls, 12x 3/8" diameter balls, 2x bearing races, 6x gaskets/shims, bush, 'o' ring and retainer for output shaft.

Back in stock.
find out more

Inner Wheel Hub Seal

Inner Wheel Hub Seal

4.28

Application: Series 1 front axles, Series 2 & Series 3 to 1980.
Description: Inner hub oil seal made by Corteco/Gaco.
Approximate dimensions: outside diameter 85mm (3.35"), thickness 7.8mm (0.3").
Original part number 239422.

find out more

Fixings Kit for Water Pump

Fixings Kit for Water Pump

19.87

Application: Series One, 1948 to 1958.

Description: Set of fixings for water pump comprising the following parts;
6x 250517 bolt 1/4"BSF x 1.5", 1x 250518 bolt 1/4"BSF x 1.75", 1x 237150 bolt 1/4"BSF x 2.25", 2x set screw 5/16"BSW x 11/16" plus 8x 1/4" lock washers and 2x 5/16" lock washers.
find out more

These Superb Prices are ONLY available when you order ON-LINE

Page:  1  2   >   >>
Bearing Overdrive Ref: 1D3790
Application: Series2 and Series3 models when fitted with Fairey/Superwinch overdrive.

Description: Single row ball bearing of Koyo or similar brand. Fitted to rear of overdrive mainshaft.

Approximate dimensions: Outside diameter 90mm(3.54"), inside diameter 40mm(1.57"), thickness 23mm(0.91")

Bearing number: 6308.

Price: 18.75 (22.50 Including VAT at 20%)



Bearing Overdrive
Hub Sleeve Assembly for Overdrive Ref: 561392
Application: Series1, Series2 and Series3 when overdrive fitted. Suitable for Fairey/ Superwinch made unit.

Description: EU manufactured syncro hub assemby.

Approximate dimensions: Overall diameter 82.5mm(3.25"), inside diameter 27mm(1.06"), thickness 30.5mm(1.2")

Price: 158.05 (189.66 Including VAT at 20%)



Hub Sleeve Assembly for Overdrive
Pivot Assembly for Selector Ref: RTC7160
Application: Series 1, Series 2 and Series 3 models with 4 or 6 cylinder engines. For use with the LT76 gearbox.

Description: Pivot assembly for the selector linkage on the Fairy/Superwinch overdrive.

Price: 94.25 (113.10 Including VAT at 20%)



Pivot Assembly for Selector
'O' Ring kit for Overdrive Ref: RTC7166
Application: Series 1, Series 2 and Series 3 models with 4 or 6 cylinder engines. For use with the LT76 gearbox.

Description: Set of 4 'O' rings for the overdrive. Made in the European Union.

Price: 3.00 (3.60 Including VAT at 20%)



'O' Ring kit for Overdrive
Mainshaft for Overdrive Ref: RTC7168
Application: Series1, Series2 and Series3 when overdrive fitted. Suitable for Fairey/ Superwinch made unit.

Description: EU manufactured mainshaft.

Approximate dimensions: Overall length 28.2cm(11.1")


Price: 181.25 (217.50 Including VAT at 20%)



Mainshaft for Overdrive
Clutch Unit for Overdrive Ref: RTC7170
Application: Series 1, Series 2 and Series 3 models with 4 or 6 cylinder engines. For use with the LT76 gearbox.

Description: This is the coupling into the overdrive from the back of the transfer box. 10 splines internally. Made in the European Union.

Approximare dimensions: Overall length 39mm(1.5"), overall diameter 49.8mm(2.0").


Price: 50.25 (60.30 Including VAT at 20%)



Clutch Unit for Overdrive
Bearing Kit for Clutch Unit Ref: RTC7171
Application: Series 1, Series 2 and Series 3 models with 4 or 6 cylinder engines. For use with the LT76 gearbox.

Description: This is the bearing kit for coupling into the overdrive - RTC7170. Kit contains 1x needle roller bearing and 2x clips Made in the European Union.


Price: 16.34 (19.61 Including VAT at 20%)



Bearing Kit for Clutch Unit
Circlip Set for Overdrive Ref: RTC7172
Application: Series 1, Series 2 and Series 3 models with 4 or 6 cylinder engines. For use with the LT76 gearbox.

Description: Set of 7 rings, 5 circlips and 2 bearing retainers.

Price: 17.95 (21.54 Including VAT at 20%)



Circlip Set for Overdrive
Oil Seal Kit Overdrive Ref: RTC7173
Application: Series 1, Series 2 and Series 3 models with 4 or 6 cylinder engines. For use with the LT76 gearbox.

Description: Pair of oilseals for the overdrive. Made in the European Union.

Approximate dimensions: Larger seal - overall diameter 65mm(2.56"), thickness 12.9mm(0.51"). Smaller seal - overall diameter 58.5mm(2.3"), thickness 4mm(0.16")

Price: 10.23 (12.28 Including VAT at 20%)



Oil Seal Kit Overdrive
Detent Kit for Overdrive Ref: RTC7181
Application: Series1, Series2 and Series3 when overdrive fitted. Suitable for Fairey/ Superwinch made unit.

Description: EU manufactured detent kit for gear selector. Comprises ball, spring and two grub screws.

Price: 3.64 (4.37 Including VAT at 20%)



Detent Kit for Overdrive
Page:  1  2   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Pulley - Alternator/Dynamo

Pulley - Alternator/Dynamo

10.20

Application: Series3 and early Defender. Also possibly Sweries2A.

Description: Pulley for alternator and possibly some dynamos. Takes 'A' section belt.

Approximate dimensions: Overall diameter 69mm(2.7"), spindle diameter 9/16"(14mm), height 23mm(0.8")


find out more

Reverse Gear Assembly

Reverse Gear Assembly

92.08

Application: Series 1, Series 2 and Series 2A with part syncromesh gearbox.

Description: OE spec reverse gear assembly with bronze bush. Larger wheel has 20 teeth, smaller 17 teeth.

Approximate dimesions: Overall diameter 75mm(3"), internal diameter 20.8mm(0.82"), length 35mm(1.4")

Previous part number: 217389

find out more

Horn Button

Horn Button

14.42

Application: Late Series1 and early Series2.

Description: Reproduction horn switch mounted on side of steering column.

Approximate dimensions: Length 52mm(2"), width 38mm(1.5"), depth 25mm(1").

find out more

Lever Assemby for Throttle Linkage

Lever Assemby for Throttle Linkage

44.52

Application: Series 2A and Series 3 when Zenith carburrettor (or Weber conversion) is fitted.

Description: Lever assembly for throttle linkage, required when changing from Solex to Zenth. Supplied with bronze bush and ball.

Approximate dimensions: Overall length 132mm(5.2").

find out more

Locking Hasp for Fuel Cap

Locking Hasp for Fuel Cap

4.50

Application: Series 2a and Series 3.

Description: Locking hasp for fuel cap with 'ears'. Allows use of padlock to secure fuel cap.

Approximate dimensions: Mounting screw centres 70mm(2.75")

Old part number: GLR361

find out more

Bail Assembly

Bail Assembly

2.70

Application: Series 2A and Series 3.

Description: Retainer for glass bowl on side of lift pump on 4 cylinder models.

Approximate dimensions: Overall length 92mm, width 58mm.

find out more

Fuel Filler Cap

Fuel Filler Cap

26.46

Application: Series 2a and Series 3.

Description: Old stock Unipart 2 lug fuel filler cap. Supplied with seal,

Approximate dimensions: Overa;; diameter 96mm(3.8").

find out more

6 Way Lighting Switch - Military

6 Way Lighting Switch - Military

153.60

Application: Series3, Light Weight, 101 and Defender military models.

Description: Old stock Lucas 34259 six way lighting swith with facility for lock barrel (not supplied).


find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -