Digital Dispensary

Product Sections


Best Sellers

'O' Ring for Thermostat

'O' Ring for Thermostat

0.55

Application: Series 1, 2 & 3 4cylinder engines.
Description: 'O' ring for sealing thermostat to cylinder head.
Approximate dimensions: outside diameter 55mm (2.2").
Original part number 01645
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Gasket Exhaust Manifold to Down Pipe

Gasket Exhaust Manifold to Down Pipe

0.96

Application: Series 1, 2 & 3 four cylinder engines.
Description: Square flange gasket for exhaust. Used on various exhaust manifolds and on some pipe to pipe exhaust joints.
find out more

Thermostat 82 degrees

Thermostat 82 degrees

10.61

Application: Series 1 1.6ltr & 2.0ltr petrol engines, Defender 2.5 & 2.5TD diesel engines.

Description: Waxstat 82degree thermostat.

Original part number: 504560.

find out more

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

12.58

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Gasket Oil Retaining Cap to Block

Gasket Oil Retaining Cap to Block

2.96

Application: Series 1 fitted with 1600cc petrol (gasolene) engine and 1954 only 2000cc petrol (gasolene) engine.
Description: Cork gasket for oil retaining cap to rear of cylinder block.
Approximate dimensions: internal diameter 108mm (4.25")
find out more

Steering Box Repair Kit

Steering Box Repair Kit

27.00

Application: Late Series 1, Series 2/2A and Series 3.

Description: Manual steering box repair kit suitable for both left hand drive and right hand drive vehicles. Kit contains 20x 9/32" diameter balls, 12x 3/8" diameter balls, 2x bearing races, 6x gaskets/shims, bush, 'o' ring and retainer for output shaft.

Back in stock.
find out more

Inner Wheel Hub Seal

Inner Wheel Hub Seal

4.28

Application: Series 1 front axles, Series 2 & Series 3 to 1980.
Description: Inner hub oil seal made by Corteco/Gaco.
Approximate dimensions: outside diameter 85mm (3.35"), thickness 7.8mm (0.3").
Original part number 239422.

find out more

Fixings Kit for Water Pump

Fixings Kit for Water Pump

19.87

Application: Series One, 1948 to 1958.

Description: Set of fixings for water pump comprising the following parts;
6x 250517 bolt 1/4"BSF x 1.5", 1x 250518 bolt 1/4"BSF x 1.75", 1x 237150 bolt 1/4"BSF x 2.25", 2x set screw 5/16"BSW x 11/16" plus 8x 1/4" lock washers and 2x 5/16" lock washers.
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > RANGE ROVER Classic Parts > Range Rover Classic Books and Publications
Range Rover Classic Technical Publications DVD Ref: ZZLTP3002
Comprehensive contents covering parts books, owners manuals and workshop manuals for Range Rover Classic from 1972 to 1995.

Product Features
> Printable - print only the pages you need. (Windows only)
> Searchable - search the entire section in seconds.
> Zoom - zoom in to see the exact details.
> Bookmarked - manuals are bookmarked to quickly locate sections.

System Requirements
PC Windows 2000 or later; DVD Reader, PDC viewer; must have administration rights to allow installation.
Mac OS X Mac OS X 10.4 or above. For OS X 10.6 (Snow Leopard) DVD Reader, PDC viewer
Important - Documents are viewable but not printable through Mac OSX. To print using a Mac you must be running a Windows installation e.g. using PC emulation software

Price: 51.66 (61.99 Including VAT at 20%)



Range Rover Classic Technical Publications DVD
Workshop manual 1970 to 1985 Ref: AKM 3630
Range Rover Repair Operation Manual 1970-1985
Official Land Rover manual reprinted by Brookland Books
Full repair manual covering all areas including supplement for 5 speed manual gearbox and auto box. Also gives full specifications, maintenance schedules, lubrication charts, wiring diagrams etc.
Soft back 8.5" x 11.5", 508 Pages
Models covered Range Rover 1970-1985

Price: 35.95



Workshop manual 1970 to 1985
Workshop manual 1986 to 1989 Ref: SRR660ENWM
Range Rover Workshop Manual all Petrol and diesel models from 1986 to 1989
Official Land Rover manual reprinted by Brookland Books
Covering both the 3.5 V8 petrol engined versions and the VM 2.4 diesel engined versions of the Range Rover Classic from 1986 (when the 1st EFi was introduced) upto 1989.
Soft back 8.25" x 11.5", 1030 Pages approx.
Models covered Range Rover 1986 to 1989

Price: 53.95



Workshop manual 1986 to 1989
Workshop manual 1990 to 1994 Ref: LHAWMENA
Range Rover Workshop Manual for all Petrol and diesel Models from 1990 to 1994
Official Land Rover manual reprinted by Brookland Books
Covers all Range Rover models from 1990 to 1994 including 3.9V8 petrol, 4.2V8 petrol, 2.5VM diesel and 200Tdi.
Soft back 8.25" x 11.5", 1200 Pages approx.
Models covered Range Rover Classic 1990 to 1994

Price: 53.95



Workshop manual 1990 to 1994
Parts Catalogue 1970 to 1985 Ref: RTC9846CH
Parts Catalogue Range Rover covering vehicles to Oct 1985 up to and including chassis suffix BA, by Land Rover Parts Ltd. Reprinted by Brooklands Books
The parts book is an absolute must for anyone embarking on a rebuild or major repair. The exploded diagrams alone more than justify it's purchase.
There is a group index and serial number information at the front and numerical index at the rear. This catalogue covers all official variations from 1970 to 10/85 including the Monteverdi 4 door. Much optional equipment and accessories are also listed.
Soft back 8.3" x 11.5", 440 pages approx.
Models covered: Range Rover to 10/85.


Price: 34.25



Parts Catalogue 1970 to 1985
Parts Catalogue Range Rover 1986 to 1991 Ref: RTC9908CB
Parts Catalogue Range Rover Classic covering vehicles from November 1985 to end of 1991 model year. From chassis suffix CA to HA, by Land Rover Parts Ltd. Reprinted by Brooklands Books
The parts book is an absolute must for anyone embarking on a rebuild or major repair. The exploded diagrams alone more than justify it's purchase.
There is a group index and serial number information at the front and numerical index at the rear. This catalogue covers all official variations from 1985 to 1991.

Soft back 292mm(11.5") x 210mm(8.3") x 21mm(0.8"), 360 pages approx.


Price: 33.73



Parts Catalogue Range Rover 1986 to 1991
Owners Handbook Range Rover 1981-82 Ref: AKM8139=
Original handbook for the introduction of the first 4 door Range Rovers from the Factory. Also covers 2 door models and the first Automatics.
Broken down into 10 sections including routine maintenance and wiring diagrams.
Soft covers 8.1" x 5.6", 186 pages.

Price: 7.95



Owners Handbook Range Rover 1981-82
Digital Dispensary > RANGE ROVER Classic Parts > Range Rover Classic Books and Publications

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Pulley - Alternator/Dynamo

Pulley - Alternator/Dynamo

10.20

Application: Series3 and early Defender. Also possibly Sweries2A.

Description: Pulley for alternator and possibly some dynamos. Takes 'A' section belt.

Approximate dimensions: Overall diameter 69mm(2.7"), spindle diameter 9/16"(14mm), height 23mm(0.8")


find out more

Reverse Gear Assembly

Reverse Gear Assembly

92.08

Application: Series 1, Series 2 and Series 2A with part syncromesh gearbox.

Description: OE spec reverse gear assembly with bronze bush. Larger wheel has 20 teeth, smaller 17 teeth.

Approximate dimesions: Overall diameter 75mm(3"), internal diameter 20.8mm(0.82"), length 35mm(1.4")

Previous part number: 217389

find out more

Horn Button

Horn Button

14.42

Application: Late Series1 and early Series2.

Description: Reproduction horn switch mounted on side of steering column.

Approximate dimensions: Length 52mm(2"), width 38mm(1.5"), depth 25mm(1").

find out more

Lever Assemby for Throttle Linkage

Lever Assemby for Throttle Linkage

44.52

Application: Series 2A and Series 3 when Zenith carburrettor (or Weber conversion) is fitted.

Description: Lever assembly for throttle linkage, required when changing from Solex to Zenth. Supplied with bronze bush and ball.

Approximate dimensions: Overall length 132mm(5.2").

find out more

Locking Hasp for Fuel Cap

Locking Hasp for Fuel Cap

4.50

Application: Series 2a and Series 3.

Description: Locking hasp for fuel cap with 'ears'. Allows use of padlock to secure fuel cap.

Approximate dimensions: Mounting screw centres 70mm(2.75")

Old part number: GLR361

find out more

Bail Assembly

Bail Assembly

2.70

Application: Series 2A and Series 3.

Description: Retainer for glass bowl on side of lift pump on 4 cylinder models.

Approximate dimensions: Overall length 92mm, width 58mm.

find out more

Fuel Filler Cap

Fuel Filler Cap

26.46

Application: Series 2a and Series 3.

Description: Old stock Unipart 2 lug fuel filler cap. Supplied with seal,

Approximate dimensions: Overa;; diameter 96mm(3.8").

find out more

6 Way Lighting Switch - Military

6 Way Lighting Switch - Military

153.60

Application: Series3, Light Weight, 101 and Defender military models.

Description: Old stock Lucas 34259 six way lighting swith with facility for lock barrel (not supplied).


find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -