Digital Dispensary

Product Sections


Best Sellers

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

12.58

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Axle Set of Brake Shoes - 10"

Axle Set of Brake Shoes - 10

33.94

Axle set of 4 10inch brake shoes by Lucas-TRW plus 4x pull-off springs, 6x imperial brake drum screws, 2x metric brake drum screws, 2 locking plates and 4 screws for anchor plates.

Application: Series1 80", 86" & 88" front and rear axles, Series 2/2A SWB front and rear, Series3 SWB front and rear to June 1980, Series3 SWB rear only from July 1980, Defender 90 rear to 1994.

Previous part numbers for shoes: RTC3411, GBS728, 505675, 505676
find out more

Rebuild kit for Solex 32PBI-2 Carburettor

Rebuild kit for Solex 32PBI-2 Carburettor

66.04

Application: Series 1 2.0litre engine 1952 to 1958 fitted with Solex 32PBI-2 carburettor. Zenith part number ZRK17.
Description: A fairly comprehensive kit of parts to rebuild this carburettor.


find out more

Felt Seal Stub Shaft to Drive Flange

Felt Seal Stub Shaft to Drive Flange

0.48

Application: Series 1 front axles, Series 2 front and rear axles, Series 3 SWB front and rear axles.
Description: Felt seal for 10 spline axle shafts to outer drive flanges.
Original part number 272086
find out more

Pack of 10 3/8"BSF Nyloc Nuts

Pack of 10 3/8

1.92

Pack of ten 3/8"BSF nyloc nuts, 19/32"(15mm) across flats, 0.45"(11.5mm) high.
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Screw for retaining Brake Drums

Screw for retaining Brake Drums

0.25

Application: Series 1, 2 & 3.
Description: Countersunk head screw 3/8"BSW by 5/8" long.
find out more

Gasket Set for Series Gearboxes

Gasket Set for Series Gearboxes

4.20

Application: Series 1, Series 2 & 3 with 4 or 6 cylinder engines.
Description: Set of replacement gaskets for main and transfer gearboxes. Does NOT include seals.
find out more

Acorn for HT Leads

Acorn for HT Leads

1.49

Application: Series One and Series Two. 1948 to 1961 approx.
Description: Acorn nut for retaining high tensions leads to distributor caps and plug caps. Use with 217279 brass washers and copper cored high tension cable.
Approximate dimensions: height 24mm(0.95"), overall diameter 15.4mm(0.6"), thread diameter 12.5mm(0.5")
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > LAND Rover Series One Parts > Land Rover Series One Cooling Parts
Page:  1  2   >   >>
Bottom Hose Ref: 268038
Application: all Series 1 models.

Description: Reproduction bottom for Series 1. Can be cut to suit top hose 268037.

Approximate dimensions: inside diameter 28mm(1.1"), overall length 35cm(13.8").

Price: 11.63 (13.96 Including VAT at 20%)




People who bought this item also bought:
1. Sealing Ring Water Pump to Cylinder Head (Ref: RTC1975)
2. Copper Ring Water Pump to Thermostat Housing (Ref: 9197)
3. 'O' Ring for Thermostat (Ref: 527235)
Bottom Hose
Bypass Hose Series 1 Ref: 242056
Application: Series 1 with 2 litre petrol engine.

Description: Reproduction thermostat bypass hose.

Approximate dimensions: Length 23cm(9"), internal diameter 35mm(1.4")

Price: 12.12 (14.54 Including VAT at 20%)




People who bought this item also bought:
1. 'O' Ring for Thermostat (Ref: 527235)
2. Bottom Hose (Ref: 268038)
3. Genuine Oil Filter Element RTC3183 (Ref: RTC3183)
Bypass Hose Series 1
Heater Hose Ref: 234063
Application: Series I and Series 2 1948 to 1967 when fitted with heater.

Description: Replacement heater hose.

Approximate dimensions: Internal diameter 7/16"(11.5mm), outside diameter 21mm(0.8"), overall length 124mm(4.9").

Price: 7.45 (8.94 Including VAT at 20%)



Heater Hose
Water Pump Series1 Petrol Ref: 269974
Application: Series 1 1.6ltr & 2.0ltr petrol (gasolene) engines.

Description: Reproduction cast iron water pump, supplied with gaskets.

Price: 42.50 (51.00 Including VAT at 20%)




People who bought this item also bought:
1. Sealing Ring Water Pump to Cylinder Head (Ref: RTC1975)
2. Copper Ring Water Pump to Thermostat Housing (Ref: 9197)
3. Brush Set for Starter Motor (Ref: 260055)
Water Pump Series1 Petrol
Spacer - Radiator Cooling Fan Ref: 233802
Application: Series 1 1600 and 2000cc engines with welded type cooling fans.

Description: Aluminium spacer block between cooling fan and water pump pulley.

Approximate dimensions: 34.5mm(1.4") x 34.5mm(1.4") x 19.5mm(0.77").

Price: 7.95 (9.54 Including VAT at 20%)



Spacer - Radiator Cooling Fan
Gasket Water Pump S1 Ref: 9118
Application Series 1 1.6ltr &2.0Ltr petrol (gasolene) engine.
Description: Original cork gasket between water pump and cylinder block.

Price: 2.00 (2.40 Including VAT at 20%)




People who bought this item also bought:
1. Sealing Ring Water Pump to Cylinder Head (Ref: RTC1975)
2. Solid Aluminium Rivets - 7/16" long - bag of 50 (Ref: 300783X50)
3. Anchor Plate for 10inch brake shoes (Ref: 236993)
Gasket Water Pump S1
Sealing Ring Water Pump to Cylinder Head Ref: RTC1975
Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")

Price: 1.82 (2.18 Including VAT at 20%)




People who bought this item also bought:
1. Copper Ring Water Pump to Thermostat Housing (Ref: 9197)
2. Brush Set for Dynamo (Ref: 261483)
3. Brush Set for Starter Motor (Ref: 260055)
Sealing Ring Water Pump to Cylinder Head
Copper Ring Water Pump to Thermostat Housing Ref: 9197
Application: Series One with 1.6 or 2 litre petrol engine. Series Two with 2 litre petrol engine.
Description: Copper ring to support 'O' ring between water pump and thermostat housing.
Approximate dimensions: outside diameter 16mm(0.63"), inside diameter 11mm(0.43"), height 7.5mm(0.3")

Price: 6.20 (7.44 Including VAT at 20%)




People who bought this item also bought:
1. Sealing Ring Water Pump to Cylinder Head (Ref: RTC1975)
2. Radiator Cap 7lb (Ref: 217437)
3. Gasket Water Pump S1 (Ref: 9118)


Related products:
1. Sealing Ring Water Pump to Cylinder Head (Ref: RTC1975)
Copper Ring Water Pump to Thermostat Housing
Fan Belt Ref: STC3673
Application: Series 1 with 1.6 litre and 2.0 litre petrol engines.
Description: New type fan belt coggedinner face for better grip.
Approximate dimensions: outer width 19mm(0.75"), depth 11mm(0.4"), length 93cm( 36.6")
Original part number 218576

Price: 19.79 (23.75 Including VAT at 20%)



Fan Belt
Thermostat 82 degrees Ref: 602687
Application: Series 1 1.6ltr & 2.0ltr petrol engines, Defender 2.5 & 2.5TD diesel engines.

Description: Waxstat 82degree thermostat.

Original part number: 504560.

Price: 8.84 (10.61 Including VAT at 20%)




People who bought this item also bought:
1. Replacement Condensor for Lucas 25D (Ref: RTC3472)
2. Brake Hose Series 1, 2A & S3 (Ref: RTC3386=)
3. Black High Tension Lead, Copper Cored (Ref: 80603)
Thermostat 82 degrees
Digital Dispensary > LAND Rover Series One Parts > Land Rover Series One Cooling Parts
Page:  1  2   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Piston Assembly 2.4TDCI

Piston Assembly 2.4TDCI

122.63

Application: Defender from 2007 to 2012 with 2.4 litre TDCI engine.

Description: Standard size piston for 89.90mm bore. Supplied with rings, gudgeon pin and circlips. Made by Nural a Federal Mogul company.



find out more

Electric Fuel Pump - Series 1

Electric Fuel Pump - Series 1

100.44

Application: Series 1 Land Rovers 1948 to 1958. Series 2 with 2 litre petrol engine.

Description: Authentic SU electric fuel pump to original pattern. For mounting in engine bay. Can be used on either positive or negative earth vehicles. NB Both outlet and inlet have threaded connectors.

Approximate dimensions: 14cm long, base diameter 73mm. Mounting holes in base are threaded M6

find out more

Repair Kit for Handbrake Adjuster

Repair Kit for Handbrake Adjuster

4.45

Application: Series 2A and Series 3.

Description: Old stock Lucas Girling repair kit for handbrake adjuster. Includes adjusting screw and wedges plus period tube of brake grease.


find out more

Injector for BMW M57 Diesel Engine

Injector for BMW M57 Diesel Engine

183.77

Application: Range Rover L322 with BMW M57 3.0litre diesel engine.

Description: Reconditioned Bosch injector for the M57 engine. Outright purchase, we do not need your old injector in vexchange.

Approximate dimensions: Overall length 22cm(8.7").

find out more

Bearing and Seals kit for Freelander 1 IRD

Bearing and Seals kit for Freelander 1 IRD

72.54

Application: Freelander 1 IRD unit except V6 model.

Description: Set of 7 OE spec bearings and 4 seals to overhaul the intermediate reduction drive unit. This kit does not include the plate for the oil cooler.

find out more

Rear Diff Repair Kit - Freelander2

Rear Diff Repair Kit - Freelander2

103.14

Application: Freelander 2 and Evoque

Description: Repair kit of OE bearings and seals for the rear differential. Kit includes 4x taper roller bearings, 3x oil seals, 2x 'O' rings, collapsible spacer and pinion nut.
find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -