Digital Dispensary

Product Sections


Best Sellers

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

12.58

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Axle Set of Brake Shoes - 10"

Axle Set of Brake Shoes - 10

33.94

Axle set of 4 10inch brake shoes by Lucas-TRW plus 4x pull-off springs, 6x imperial brake drum screws, 2x metric brake drum screws, 2 locking plates and 4 screws for anchor plates.

Application: Series1 80", 86" & 88" front and rear axles, Series 2/2A SWB front and rear, Series3 SWB front and rear to June 1980, Series3 SWB rear only from July 1980, Defender 90 rear to 1994.

Previous part numbers for shoes: RTC3411, GBS728, 505675, 505676
find out more

Rebuild kit for Solex 32PBI-2 Carburettor

Rebuild kit for Solex 32PBI-2 Carburettor

66.04

Application: Series 1 2.0litre engine 1952 to 1958 fitted with Solex 32PBI-2 carburettor. Zenith part number ZRK17.
Description: A fairly comprehensive kit of parts to rebuild this carburettor.


find out more

Felt Seal Stub Shaft to Drive Flange

Felt Seal Stub Shaft to Drive Flange

0.48

Application: Series 1 front axles, Series 2 front and rear axles, Series 3 SWB front and rear axles.
Description: Felt seal for 10 spline axle shafts to outer drive flanges.
Original part number 272086
find out more

Pack of 10 3/8"BSF Nyloc Nuts

Pack of 10 3/8

1.92

Pack of ten 3/8"BSF nyloc nuts, 19/32"(15mm) across flats, 0.45"(11.5mm) high.
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Screw for retaining Brake Drums

Screw for retaining Brake Drums

0.25

Application: Series 1, 2 & 3.
Description: Countersunk head screw 3/8"BSW by 5/8" long.
find out more

Gasket Set for Series Gearboxes

Gasket Set for Series Gearboxes

4.20

Application: Series 1, Series 2 & 3 with 4 or 6 cylinder engines.
Description: Set of replacement gaskets for main and transfer gearboxes. Does NOT include seals.
find out more

Acorn for HT Leads

Acorn for HT Leads

1.49

Application: Series One and Series Two. 1948 to 1961 approx.
Description: Acorn nut for retaining high tensions leads to distributor caps and plug caps. Use with 217279 brass washers and copper cored high tension cable.
Approximate dimensions: height 24mm(0.95"), overall diameter 15.4mm(0.6"), thread diameter 12.5mm(0.5")
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > DEFENDER Parts > Defender Cooling System
Page:  1  2   >   >>
Thermostat 88 degrees Ref: ETC4765
Application: Rover V8 engine, 3.5 litre and 3.9 litre as fitted to Defender, Discovery 1 and Range Rover Classic.

Description: 'Waxstat' 88 degree thermostat from Adwest Western Thomson Ltd

Price: 3.31 (3.97 Including VAT at 20%)



Thermostat 88 degrees
Filler Plug 300TDI Ref: ERR4686B
Application: Defender, Discovery 1 and Range Rover Classic.

Description: Brass plug and 'O' ring to replace original plastic plug. This is used on several radiators and thermostat housing of 300TDi.

Approximate dimensions: Length 25mm(1"), overall diameter 31.2mm(1.23")

Previous part number: NTC4609

Price: 1.95 (2.34 Including VAT at 20%)



Filler Plug 300TDI
Replacement Water Pump for Defender Ref: STC635D
Replacement water pump for Defender, supplied with gasket.

Application: 2.5 litre diesel and 2.5 litre petrol with air con and A127 alternator. 2.5 diesel turbo standard and air con versions.

Approximate dimensions: 29cm x 15cm, spindle height 13cm

Price: 35.00 (42.00 Including VAT at 20%)



Replacement Water Pump  for Defender
Replacement Water Pump Defender 200TDi Ref: STC639D
Replacement water pump with gasket.

Application: Defender 200TDi.

Approximate dimensions: 29cm x 15cm, spindle height 12.5cm

Price: 41.85 (50.22 Including VAT at 20%)



Replacement Water Pump Defender 200TDi
Replacement Viscous Unit 2.5Dt & 200TDi Ref: ETC7238=
Replacement viscous unit.

Application: Defender 2.5DT UK & Europe, 200TDI UK & Europe in Defender, Discovery and Classic Range Rover.

Approximate dimensions: overall diameter 15cm, height 5.7cm, left hand thread mounting nut 32mm across flats.

Price: 56.25 (67.50 Including VAT at 20%)



Replacement Viscous Unit 2.5Dt & 200TDi
Replacement Water Pump V8 Ref: STC1611D
Replacement water pump supplied with gasket. Non viscous unit type, fan is bolted directly to pump.

Application: Range Rover Classic carb engines to approx 1980, Defender V8 non air con.

Approximate dimensions: 27cm x 20cm, spindle height 16.5cm.

Price: 24.00 (28.80 Including VAT at 20%)



Replacement Water Pump V8
Replacement Water Pump for V8 Defender Ref: STC488D
Replacement water pump for Defender V8 with air conditioning. From 1984 to approx 1994.

Approximate dimensions: 27.5cm x 20cm, spindle height 14cm

Supplied with gasket.

Price: 44.10 (52.92 Including VAT at 20%)



Replacement Water Pump for V8 Defender
Genuine Water Pump 300TDi Ref: PEB500090
Genuine Land Rover water pump with gasket.

Application: 300TDi engine when fitted to Defender, Discovery or Range Rover Classic.

Approximate dimensions: 21.5cm x 12.5cm, spindle height 6cm.

Price: 64.23 (77.08 Including VAT at 20%)



Genuine Water Pump 300TDi
Replacement Water Pump 300TDi Ref: PEB500090=
Application: 300TDi engine when fitted to Defender, Discovery or Range Rover Classic.

Description: Airtex water pump with gasket.

Approximate dimensions: 21.5cm x 12.5cm, spindle height 6cm.

Price: 21.44 (25.73 Including VAT at 20%)



Replacement Water Pump 300TDi
Replacement Vscous Unit 300TDi Ref: ERR2266=
Replacement viscous unit for 300TDi engines.

Application: Discovery 1994 to 1999, Defender 1994 to 2002ish, Range Rover Classic 1994 to 1995.

Approximate dimensions: overall diameter 165mm, height 70mm. Left hand thread mounting nut 32mm across flats.

Price: 62.00 (74.40 Including VAT at 20%)



Replacement Vscous Unit 300TDi
Digital Dispensary > DEFENDER Parts > Defender Cooling System
Page:  1  2   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Piston Assembly 2.4TDCI

Piston Assembly 2.4TDCI

122.63

Application: Defender from 2007 to 2012 with 2.4 litre TDCI engine.

Description: Standard size piston for 89.90mm bore. Supplied with rings, gudgeon pin and circlips. Made by Nural a Federal Mogul company.



find out more

Electric Fuel Pump - Series 1

Electric Fuel Pump - Series 1

100.44

Application: Series 1 Land Rovers 1948 to 1958. Series 2 with 2 litre petrol engine.

Description: Authentic SU electric fuel pump to original pattern. For mounting in engine bay. Can be used on either positive or negative earth vehicles. NB Both outlet and inlet have threaded connectors.

Approximate dimensions: 14cm long, base diameter 73mm. Mounting holes in base are threaded M6

find out more

Repair Kit for Handbrake Adjuster

Repair Kit for Handbrake Adjuster

4.45

Application: Series 2A and Series 3.

Description: Old stock Lucas Girling repair kit for handbrake adjuster. Includes adjusting screw and wedges plus period tube of brake grease.


find out more

Injector for BMW M57 Diesel Engine

Injector for BMW M57 Diesel Engine

183.77

Application: Range Rover L322 with BMW M57 3.0litre diesel engine.

Description: Reconditioned Bosch injector for the M57 engine. Outright purchase, we do not need your old injector in vexchange.

Approximate dimensions: Overall length 22cm(8.7").

find out more

Bearing and Seals kit for Freelander 1 IRD

Bearing and Seals kit for Freelander 1 IRD

72.54

Application: Freelander 1 IRD unit except V6 model.

Description: Set of 7 OE spec bearings and 4 seals to overhaul the intermediate reduction drive unit. This kit does not include the plate for the oil cooler.

find out more

Rear Diff Repair Kit - Freelander2

Rear Diff Repair Kit - Freelander2

103.14

Application: Freelander 2 and Evoque

Description: Repair kit of OE bearings and seals for the rear differential. Kit includes 4x taper roller bearings, 3x oil seals, 2x 'O' rings, collapsible spacer and pinion nut.
find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -