Digital Dispensary
  •  
  • View Basket
  • Checkout
  • Items:, Value:
  •  

Product Sections


Best Sellers

Injector Remover TD5

Injector Remover TD5

111.91

Application: TD5 diesel engine as fitted to Defender and Discovery2.
Description: Slide hammer type remover for injectors

find out more

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

11.50

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Gasket Set for Series Gearboxes

Gasket Set for Series Gearboxes

4.20

Application: Series 1, Series 2 & 3 with 4 or 6 cylinder engines.
Description: Set of replacement gaskets for main and transfer gearboxes. Does NOT include seals.
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

'O' Ring for Thermostat

'O' Ring for Thermostat

0.55

Application: Series 1, 2 & 3 4cylinder engines.
Description: 'O' ring for sealing thermostat to cylinder head.
Approximate dimensions: outside diameter 55mm (2.2").
Original part number 01645
find out more

Acorn for HT Leads

Acorn for HT Leads

1.49

Application: Series One and Series Two. 1948 to 1961 approx.
Description: Acorn nut for retaining high tensions leads to distributor caps and plug caps. Use with 217279 brass washers and copper cored high tension cable.
Approximate dimensions: height 24mm(0.95"), overall diameter 15.4mm(0.6"), thread diameter 12.5mm(0.5")
find out more

Buffer for Door

Buffer for Door

4.63

Application: Series One.
Description: Buffer in front wing panel to prevent door damaging wing.
Approximate dimensions: Overall diameter 25.4mm(1"), length 25.5mm(1")
find out more

Split Brass Washer

Split Brass Washer

0.54

Application: Series One and Series Two. 1948 to 1961 approx.
Description: Split brass washer for retaining high tensions leads to distributor caps and plug caps. Use with 217278 acorn nut and copper cored high tension cable.
Approximate dimensions: overall diameter 10mm(0.375")
find out more

Black High Tension Lead, Copper Cored

Black High Tension Lead, Copper Cored

1.44

Application: Series One and Series Two
Description: Black high tension cable for spark plugs. 7mm(0.28") outside diameter with 19 strand copper core.

Sold by the metre
find out more

These Superb Prices are ONLY available when you order ON-LINE

Land Rover Parts

Particularly genuine and original equipment Land Rover parts. Based in UK and exporting to the world.
We supply parts for Range Rover Classic, Range Rover Generation 2 (38A), Range Rover Generation 3, Range Rover Sport, Discovery 1, 2, 3 & 4, Defender, Freelander 1, Freelander 2, North American Spec. vehicles, Series 1 Series 2, Series 2A, Series 3, One-Ten, Ninety, One-Thirty and Military Models. Land Rover Series 1 parts  1948 to 1958 are now listed in our online shop.

We export Land Rover parts to USA and Canada!

DINGOCROFT offers World-wide export of parts for Land Rover including USA and Canada, from a small item in a padded envelope to a container load (or anything in between).

We also offer mail order deliveries within the U.K. of Land Rover parts online

Our free van delivery service operates within a 20 mile radius of High Wycombe. This provides Land Rover parts to your doorstep, whether you are a private customer, trade, garage or fleet customer. This service covers all of Buckinghamshire plus large areas of Oxfordshire, Berkshire, Hertfordshire, Middlesex and West London. This is free for orders greater than £75.00, otherwise a £3.00 delivery charge is made. We make frequent deliveries to the following towns; High Wycombe, Beaconsfield, Aylesbury, Marlow, Princes Risborough, Wendover, Slough, Maidenhead, Reading, Bracknell, Watford, Berkhamsted, Hemel Hempstead, Leighton Buzzard, Uxbridge, Hayes, West Drayton, Staines, Thame, Henley on Thames, Watlington.

DINGOCROFT stocks in excess of 12,000 lines of Land Rover parts and we are the largest independent Land Rover specialist in Buckinghamshire and probably in the Thames Valley. As well as Land Rover parts, we offer Land Rover manuals, Land Rover Special Tools (formerly Churchill Tools), Land Rover accessories and off-road equipment. Your one stop Land Rover parts shop.

Our sales counter is open to both trade and retail customers where our knowledgeable staff will help you select from our ever growing range of Land Rover parts, tools, accessories, books and all manner of things "Land Rover".

Opening Hours We are open weekdays from 8:30 to 18:00 with late night opening on Thursday to 8pm (20:00). 

If you need help or assistance in anyway please telephone us on 01494 448367 or if outside Great Britain +44 1494 448367

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Brush Set for Starter Motor

Brush Set for Starter Motor

4.97

Application: Series 1 and Series 2 petrol starter motor.

Description: Pair of brushes for starter motor.

Approximate dimensions: Each brush is 19mm(3/4") x 14mm(0.55") x 9mm(0.35") with lead of 95mm(3.75")

Alternative part numbers: LU255659, GSB103.

find out more

Brush Set for Dynamo

Brush Set for Dynamo

4.32

Application: Series 1 1948 to 1958, Series 2 1958 to 1960.

Description: Pair of brushes for ucas C39 dynamo.

Approximate dimensions: Each brush is 19mm(3/4") x 16mm(5/8") x 6.5mm1/4"). Lead is 50mm(2") long.

find out more

Heater Hose

Heater Hose

8.94

Application: Series I and Series 2 1948 to 1967 when fitted with heater.

Description: Replacement heater hose.

Approximate dimensions: Internal diameter 7/16"(11.5mm), outside diameter 21mm(0.8"), overall length 124mm(4.9").

find out more

Nut - Steering Column

Nut - Steering Column

1.44

Application: Series 2A suffix C onwards and Series 3.

Description: Nut at top of steering column to retain steering wheel.

Approximate dimensions: 1"(25.4mm) across flats, height 9mm(0.35"), thread approx 11/16" fine.

find out more

Bearing Top of Steering Column

Bearing Top of Steering Column

11.10

Application: Late Series 2A and Series 3.

Description: Replacement ball bearing assembly for top of steering column.

Approximate dimensions: Height 21.6mm(0.85"), internal diameter 22.5mm(0.9"), outside diameter 32.7mm(1.3")

find out more

Drop Arm Puller Series 2 and Series 3

Drop Arm Puller Series 2 and Series 3

35.90

Application: Land Rover Series 2, Series 2A, Series 3

Description: Over time the steering drop arm and the steering box splines corrode together making it difficult to remove the drop arm.
43mm spread. Always grease threaded bar.

Uquivalent to Land Rover tool LRT-57-500 previously RO.600000

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -