Digital Dispensary

Product Sections


Best Sellers

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

12.58

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Axle Set of Brake Shoes - 10"

Axle Set of Brake Shoes - 10

33.94

Axle set of 4 10inch brake shoes by Lucas-TRW plus 4x pull-off springs, 6x imperial brake drum screws, 2x metric brake drum screws, 2 locking plates and 4 screws for anchor plates.

Application: Series1 80", 86" & 88" front and rear axles, Series 2/2A SWB front and rear, Series3 SWB front and rear to June 1980, Series3 SWB rear only from July 1980, Defender 90 rear to 1994.

Previous part numbers for shoes: RTC3411, GBS728, 505675, 505676
find out more

Rebuild kit for Solex 32PBI-2 Carburettor

Rebuild kit for Solex 32PBI-2 Carburettor

66.04

Application: Series 1 2.0litre engine 1952 to 1958 fitted with Solex 32PBI-2 carburettor. Zenith part number ZRK17.
Description: A fairly comprehensive kit of parts to rebuild this carburettor.


find out more

Felt Seal Stub Shaft to Drive Flange

Felt Seal Stub Shaft to Drive Flange

0.48

Application: Series 1 front axles, Series 2 front and rear axles, Series 3 SWB front and rear axles.
Description: Felt seal for 10 spline axle shafts to outer drive flanges.
Original part number 272086
find out more

Pack of 10 3/8"BSF Nyloc Nuts

Pack of 10 3/8

1.92

Pack of ten 3/8"BSF nyloc nuts, 19/32"(15mm) across flats, 0.45"(11.5mm) high.
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Screw for retaining Brake Drums

Screw for retaining Brake Drums

0.25

Application: Series 1, 2 & 3.
Description: Countersunk head screw 3/8"BSW by 5/8" long.
find out more

Gasket Set for Series Gearboxes

Gasket Set for Series Gearboxes

4.20

Application: Series 1, Series 2 & 3 with 4 or 6 cylinder engines.
Description: Set of replacement gaskets for main and transfer gearboxes. Does NOT include seals.
find out more

Acorn for HT Leads

Acorn for HT Leads

1.49

Application: Series One and Series Two. 1948 to 1961 approx.
Description: Acorn nut for retaining high tensions leads to distributor caps and plug caps. Use with 217279 brass washers and copper cored high tension cable.
Approximate dimensions: height 24mm(0.95"), overall diameter 15.4mm(0.6"), thread diameter 12.5mm(0.5")
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > DISCOVERY 1 parts > Discovery 1 Cooling System
Page:  1  2   >   >>
Replacement Heater Hoses Discovery NAS Ref: HEATERHOSEKIT03
Application: Discovery 1 North American Specification to chassis number SA163099/SA501919.
Description: Set of four replacement hoses and eight hose clips. Equivalent to 2x PCH000100(AWR1362), 1x ETC6889 and 1x ETC6890.

Price: 9.50 (11.40 Including VAT at 20%)




People who bought this item also bought:
1. Replacement Bottom Hose for Discovery 1 V8 (Ref: PCH000060D)
2. Replacement Top Hose Discovery 1 V8 (Ref: PCH000050D)
3. Reproduction Land Rover Badge S1 and S2 (Ref: 332670S)
Replacement Heater Hoses Discovery NAS
Genuine Heater Hose Set for Discovery 1 NAS Ref: HEATERHOSEKIT04
Application: Discovery 1 North American Specification from chassis numberTA163100/TA501920 onwards.
Description: Set of 3 genuine heater hoses and 6x replacement hose clips. Set contains 2x PCH000110 (AWR2651/AWR3833) and 1x PEH101530.

Price: 16.13 (19.36 Including VAT at 20%)



Genuine Heater Hose Set for Discovery 1 NAS
Replacement Top Hose Discovery 1 V8 Ref: PCH000050D
Application: Discovery 1 V8 from chassis number MA098380 (approx 1995), North American Spec Discovery 1 from RA098380 (approx 1994).
Description: Radiator top hose.
Old part number: ESR3297

Price: 6.00 (7.20 Including VAT at 20%)




People who bought this item also bought:
1. Replacement Bottom Hose for Discovery 1 V8 (Ref: PCH000060D)
2. Replacement Heater Hoses Discovery NAS (Ref: HEATERHOSEKIT03)
3. Reproduction Land Rover Badge S1 and S2 (Ref: 332670S)
Replacement Top Hose Discovery 1 V8
Replacement Bottom Hose for Discovery 1 V8 Ref: PCH000060D
Application: Discovery 1 V8 from chassis number MA081992 (approx 1995), North American Spec Discovery 1 all except models fitted with Advance Evaporative Loss System.
Description: Bottom radiator hose assembly.

Price: 12.75 (15.30 Including VAT at 20%)




People who bought this item also bought:
1. Replacement Top Hose Discovery 1 V8 (Ref: PCH000050D)
2. Replacement Heater Hoses Discovery NAS (Ref: HEATERHOSEKIT03)
3. Reproduction Land Rover Badge S1 and S2 (Ref: 332670S)
Replacement Bottom Hose for Discovery 1 V8
Genuine Bottom Hose for Discovery 1 V8 Ref: PCH000070
Application: Discovery 1 V8 and North American Spec Discovery 1 fitted with Advance Evaporative Loss system.
Description: Bottom radiator hose assembly

Price: 27.14 (32.57 Including VAT at 20%)



Genuine Bottom Hose for Discovery 1 V8
Thermostat 88 degrees Ref: ETC4765
Application: Rover V8 engine, 3.5 litre and 3.9 litre as fitted to Defender, Discovery 1 and Range Rover Classic.

Description: 'Waxstat' 88 degree thermostat from Adwest Western Thomson Ltd

Price: 3.31 (3.97 Including VAT at 20%)



Thermostat 88 degrees
Filler Plug 300TDI Ref: ERR4686B
Application: Defender, Discovery 1 and Range Rover Classic.

Description: Brass plug and 'O' ring to replace original plastic plug. This is used on several radiators and thermostat housing of 300TDi.

Approximate dimensions: Length 25mm(1"), overall diameter 31.2mm(1.23")

Previous part number: NTC4609

Price: 1.95 (2.34 Including VAT at 20%)



Filler Plug 300TDI
Replacement Viscous Unit 2.5Dt & 200TDi Ref: ETC7238=
Replacement viscous unit.

Application: Defender 2.5DT UK & Europe, 200TDI UK & Europe in Defender, Discovery and Classic Range Rover.

Approximate dimensions: overall diameter 15cm, height 5.7cm, left hand thread mounting nut 32mm across flats.

Price: 56.25 (67.50 Including VAT at 20%)



Replacement Viscous Unit 2.5Dt & 200TDi
Replacement Water Pump for V8 EFI Ref: STC483D
Replacement water pump for V8 EFi engines, both 3.5 and 3.9 litre. Supplied with gasket.

Application: Discovery 1 1989 to 1994, Range Rover Classic 1986 to 1994.

Aproximate dimensions: 27.5cm x 20cm , spindle height 14cm

Price: 47.50 (57.00 Including VAT at 20%)



Replacement Water Pump for V8 EFI
Replacement Water Pump for 200TDi Ref: RTC6395D
Replacement water pump for 200TDi engines. Supplied with gasket.

Application: Discovery and Range Rover Classic, NOT Defender.

Approximate dimensions: 27cm x 17cm, spindle height 12.5cm

Price: 45.00 (54.00 Including VAT at 20%)



Replacement Water Pump for 200TDi
Digital Dispensary > DISCOVERY 1 parts > Discovery 1 Cooling System
Page:  1  2   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Piston Assembly 2.4TDCI

Piston Assembly 2.4TDCI

122.63

Application: Defender from 2007 to 2012 with 2.4 litre TDCI engine.

Description: Standard size piston for 89.90mm bore. Supplied with rings, gudgeon pin and circlips. Made by Nural a Federal Mogul company.



find out more

Electric Fuel Pump - Series 1

Electric Fuel Pump - Series 1

100.44

Application: Series 1 Land Rovers 1948 to 1958. Series 2 with 2 litre petrol engine.

Description: Authentic SU electric fuel pump to original pattern. For mounting in engine bay. Can be used on either positive or negative earth vehicles. NB Both outlet and inlet have threaded connectors.

Approximate dimensions: 14cm long, base diameter 73mm. Mounting holes in base are threaded M6

find out more

Repair Kit for Handbrake Adjuster

Repair Kit for Handbrake Adjuster

4.45

Application: Series 2A and Series 3.

Description: Old stock Lucas Girling repair kit for handbrake adjuster. Includes adjusting screw and wedges plus period tube of brake grease.


find out more

Injector for BMW M57 Diesel Engine

Injector for BMW M57 Diesel Engine

183.77

Application: Range Rover L322 with BMW M57 3.0litre diesel engine.

Description: Reconditioned Bosch injector for the M57 engine. Outright purchase, we do not need your old injector in vexchange.

Approximate dimensions: Overall length 22cm(8.7").

find out more

Bearing and Seals kit for Freelander 1 IRD

Bearing and Seals kit for Freelander 1 IRD

72.54

Application: Freelander 1 IRD unit except V6 model.

Description: Set of 7 OE spec bearings and 4 seals to overhaul the intermediate reduction drive unit. This kit does not include the plate for the oil cooler.

find out more

Rear Diff Repair Kit - Freelander2

Rear Diff Repair Kit - Freelander2

103.14

Application: Freelander 2 and Evoque

Description: Repair kit of OE bearings and seals for the rear differential. Kit includes 4x taper roller bearings, 3x oil seals, 2x 'O' rings, collapsible spacer and pinion nut.
find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -