Digital Dispensary

Product Sections


Best Sellers

Gasket Set for Series Gearboxes

Gasket Set for Series Gearboxes

4.20

Application: Series 1, Series 2 & 3 with 4 or 6 cylinder engines.
Description: Set of replacement gaskets for main and transfer gearboxes. Does NOT include seals.
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Spigot Bush

Spigot Bush

1.45

Application: All 4 and 6 cylinder engines fitted to Series 1, 2 & 3. Also 200 & 300TDi fitted to Defender, Discovery 1 and Range Rover Classic. Also TD5 models. In addition Series 1, 2 and 3 transfer box.

Description: Bronze bush fitted to rear of crankshaft to take nose of first motion shaft of gearbox. Also used as bush between front output shaft and rear output shaft in Series transfer boxes (not 109V8).
Original part number 8566 and 8566L.

Approximate dimensions: Outside diameter 1 1/16"(27mm), inside diameter 7/8"(22mm), length 0.84"(21.4mm)
find out more

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

12.58

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Injector Remover TD5

Injector Remover TD5

117.79

Application: TD5 diesel engine as fitted to Defender and Discovery2.
Description: Slide hammer type remover for injectors

find out more

Sundry Sale £1.00

1.00


find out more

Black High Tension Lead, Copper Cored

Black High Tension Lead, Copper Cored

1.75

Application: Series One and Series Two
Description: Black high tension cable for spark plugs. 7mm(0.28") outside diameter with 19 strand copper core.

Sold by the metre
find out more

Pack of 10 7/16" BSF Nyloc Nuts

Pack of 10 7/16

2.28

Pack of ten 7/16" BSF nyloc nuts, 45/64"(17.8mm) across flats, 0.52"(13.2mm) high.
find out more

Copper Ring Water Pump to Thermostat Housing

Copper Ring Water Pump to Thermostat Housing

7.44

Application: Series One with 1.6 or 2 litre petrol engine. Series Two with 2 litre petrol engine.
Description: Copper ring to support 'O' ring between water pump and thermostat housing.
Approximate dimensions: outside diameter 16mm(0.63"), inside diameter 11mm(0.43"), height 7.5mm(0.3")
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > LAMPS and Electrical Items > Lumenition Ignition Systems
Lumenition Optronic Ignition - Main Kit Ref: ZZLUMPMA50
Lumenition Optronic Ignition is an infra-red switched, solid state system. This main kit contains power module and optical switch together with wiring and mounting screws for power module.
For Negative earth vehicles only, must not be used with low-resistance electronic coils.
Use with specifik fitting kit for your vehicle.

Price: 190.00 (228.00 Including VAT at 20%)



Lumenition Optronic Ignition - Main Kit
Fitting kit for Lucas 35D V8 Distributor Ref: ZZLUMFK114
Fitting kit for use with Lumenition Optronic main kit. Only for use with points type distributors.
Application: Range Rover Classic V8, Ser3 109 V8, Defender V8 engines fitted with Lucas 35D points type distributors.
Image shows ZZLUMFK116 fitting kit which is very similar.

Price: 23.00 (27.60 Including VAT at 20%)



Fitting kit for Lucas 35D V8 Distributor
Fitting Kit for Lucas 25D Distributor Ref: ZZLUMFK116
Fitting kit for use with Lumenition Optronic main kit.
Application: Ser2A and Ser3 4 cylinder engines fitted with Lucas 25D distributors.

Price: 18.50 (22.20 Including VAT at 20%)



Fitting Kit for Lucas 25D Distributor
Fitting Kit for Lucas 45D Distributor Ref: ZZLUMFK117
Fitting kit for use with Lumenition Optronic main kit.
Application: Ser3 4 cylinder engines fitted with Lucas 45D distributors.
Image shows ZZLUMFK116 fitting kit which is very similar.

Price: 18.50 (22.20 Including VAT at 20%)



Fitting Kit for Lucas 45D Distributor
Fitting kit for Ducellier Distributor Ref: ZZLUMFK805
Fitting kit for use with Lumenition Optronic main kit.
Application: Ser3 4 cylinder and Defender 4 cylinder engines fitted with Ducellier distributors.
This kit includes a new base plate, hence the large price differential with the Lucas fitting kits.

Price: 90.00 (108.00 Including VAT at 20%)



Fitting kit for Ducellier Distributor
Lumenition Magnetronic Ignition System Ref: ZZLUMMTK003
The Lumenition Magnetronic ignition system replaces points in Lucas distributors with magnetic disk and sensor. Keeps original look to wiring, simple to fit, more reliable than points and will tolerate a fair bit of wear in the distributor bearings.
Application: Lucas 25D 4cyl distributor as fitted to Ser2A and early Ser3 engines.
Image shows ZZLUMMTK007 kit which is very similar.

Price: 80.00 (96.00 Including VAT at 20%)



Lumenition Magnetronic Ignition System
Lumenition Magnetronic Ignition System - Lucas 45D Ref: ZZLUMMTK007
The Lumenition Magnetronic ignition system replaces points in Lucas distributors with magnetic disk and sensor. Keeps original look to wiring, simple to fit, more reliable than points and will tolerate a fair bit of wear in the distributor bearings.
Application: Lucas 45D 4cyl distributor as fitted to some Ser3 engines and Defender 4 cyl petrol engines.

Price: 86.20 (103.44 Including VAT at 20%)



Lumenition Magnetronic Ignition System - Lucas 45D
Digital Dispensary > LAMPS and Electrical Items > Lumenition Ignition Systems

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Air Hose Series 1

59.40

Application: Series 1 with the 2 litre petrol engine from 1955 to 1958. Also Series 2 with the 2 litre engine.

Description: Reproduction air hose between air filter and carburettor.

Approximate dimensions: Overall length 24.5cm(9.6"), internal diameter 50.8mm(2").

find out more

Shackle Pin

Shackle Pin

13.92

Application: Series 1 1948 to 1953.

Description: Reproduction shackle pin for rear of rear springs where the narrow 1.75" springs are fitted.

Approximate dimensions: Overall length 3.75", shank diameter 9/16", thread 1/2"BSF.

find out more

Genuine Lucas 45D4 Distributor

Genuine Lucas 45D4 Distributor

57.60

Application: 4 cylinder petrol engines in Series2A, Series3 and Defender.

Description: New old stock genuine Lucas 4261B distributor.

find out more

Lens Stop/Tail Lamp

Lens Stop/Tail Lamp

5.95

Application: Series 2A and early Series 3.

Description: All red (no window for number plate illumination) lens with built in reflector.

Approximate dimensions: Overall diameter 79mm(3.1"), height 39mm(1.5").

find out more

Lens LH for Front Lamp

Lens LH for Front Lamp

78.00

Application: Range Rover Classic up to chassis suffix CA (approx 1986).

Description: Original Lucas L854 lens for right hand side cum indicator lamp.


find out more

Lens RH for Front Lamp

Lens RH for Front Lamp

78.00

Application: Range Rover Classic up to chassis suffix CA (approx 1986).

Description: Original Lucas L854 lens for right hand side cum indicator lamp.


find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -